Product Registration
Product Registration

- 1.GUIDE
- 2.AUTHENTICATION
- 3.RETAILERS
- 4.REGISTRATION
1. GUIDE TO AUTHENTICATION AND REGISTRATION
Please read and follow the 4 steps below :
* A. Guide ->
* B. Product authentication ->
* C. Retailers ->
* D. Registration (COA)
Each step can be entered by clicking on the four tabs above.
After completing all four steps to register your product, you can download the Certificate Of Authenticity (COA sample below) as proof of warranty coverage.
The warranty is for a period of 1-year from original date of purchase.
NOTE: You must submit the COA to the place of purchase to be covered by warranty.
Use any of the two methods of Authentication
Using the 12-digit code
Enter the 12-digit/letter code etched near the butt end of shaft.
* Letters (2) + Numbers (7) + Letters (3)
* (Ex) AB 1234567 ABC
Using the QR code sticker
* Open the camera on your mobile phone.
* Scan the QR code on the sticker attached near the butt end of shaft.
* Be sure to position the camera screen to clearly scan the code.
* Note: If the QR code does not scan well, enter the 12-digit code above in A.

3. REGISTERED DEALER/RETAILERS
You can check all official dealer and registered retailer information by authenticating your Autoflex product.
There are currently over 237 registered retailers of Autoflex products throughout the World.
Registered shafts with COA can be covered by warranty only at the location where the shaft was originally purchased.
4. COA REGISTRATION & WARRANTY
[REGISTRATION]
Once the shaft has been authenticated as genuine, it can then be registered for COA and Warranty coverage.
After your Name, Email and Original place of purchase is entered, the COA can be downloaded for safekeeping.
The COA must be presented when claiming warranty of the registered product.
[WARRANTY]
The warranty is for a period of 1-year from original date of purchase.
All warranty claim must be made through the authorized retailer/dealer where the product was originally purchased.
NOTE: Autoflex shafts and products may not be covered by warranty if purchased from non-authorized retailer/dealer.
2. PRODUCT AUTHENTICATION
[Use any of the two methods of Authentication]
A. Using the 12-digit code
Enter the 12-digit/letter code etched near the butt end of shaft.
Letters (2) + Numbers (7) + Letters (3)
(Ex) AB 1234567 ABC
B. Using the QR code sticker
Open the camera on your mobile phone.
Scan the QR code on the sticker attached near the butt end of shaft.
Be sure to position the camera screen to clearly scan the code.
Note: If the QR code does not scan well, enter the 12-digit code above in A.

3. REGISTERED RETAILERS
Contact information for the retailer is currently not available.
(This shaft is authentic and can be registered for COA)
4. COA REGISTRATION & WARRANTY